Facade maintenance by rope access in Dubai

Water Leaking From Window? Causes and Fixes for Dubai Homes & Offices

Short answer: water leaking from a window is usually caused by failed sealant around the frame, blocked drainage holes in the bottom track, worn gaskets or seals, gaps at frame corners, or a damaged sill. Start by clearing the drainage holes and checking the outside sealant. If water still comes in, a leak test is needed to find the exact entry point before anything is sealed.

Window leaks in Dubai often appear during the few heavy rain days of the year, during facade cleaning, or when AC condensate drips from units above. Because they are rare, many leaks are ignored until stains, swollen skirting or mould appear. Finding the real cause matters: putting silicone over the wrong joint often just moves the leak somewhere else.

Facade maintenance by rope access in Dubai

Common causes of window leaks

CauseTypical signUsual fix
Failed perimeter sealantWater at the edges of the frame or on the wall belowRemove old sealant and re-seal
Blocked drainage (weep) holesWater fills the bottom track and spills insideClear the holes and track
Worn gaskets or brush sealsWater or dust at the meeting point of sliding panelsReplace gaskets or seals
Open frame cornersDrips from the bottom cornersSeal the corner joints
Damaged or back-sloping sillWater sitting on the sill, entering the wallRepair or re-slope the sill
Loose or misaligned sashesGaps when the window is closedAdjust hardware and rollers
Failed glazing sealWater between glass and frameRe-glaze or replace gaskets

Why windows leak in Dubai buildings

  • Heat and UV harden sealant and shrink gaskets, opening small gaps
  • Sand blocks drainage holes in sliding window tracks
  • Wind-driven rain pushes water sideways into joints that stay dry in normal rain
  • Building movement stresses corners and perimeter joints
  • Facade cleaning water can reveal leaks that rain rarely does
  • AC condensate from units above can run down the facade and into window heads

Quick checks you can do yourself

  1. Look at the bottom of the outer frame for small drainage slots and clear them with a soft brush or thin plastic tool.
  2. Vacuum sand from the track of sliding windows.
  3. Pour a little water into the track and check that it drains outside quickly.
  4. Look at the sealant between the frame and the wall from inside and, if you can reach safely, outside. Cracks or gaps are a warning sign.
  5. Check the rubber gaskets around the glass for shrinkage at the corners.
  6. Close the window and look for daylight around the edges.

Do not lean out of upper-floor windows to check the outside. For high floors, ask building management or a facade team.

Leak or condensation?

Not all water near a window is a leak. In humid months, condensation can form on cold glass and frames, especially in rooms with strong air-conditioning. Condensation appears without rain and runs down the glass. A leak usually appears during or after rain, cleaning or a dripping AC above, and often starts at a joint or corner.

How professionals find the leak

A good leak investigation is systematic:

  1. Gather information: when the leak appears, where the water shows, and whether it is linked to rain, cleaning or AC.
  2. Inspect the window and surrounding facade inside and out.
  3. Water test from the bottom up, wetting one area at a time, so the entry point can be identified.
  4. Check for other sources, such as balconies, slab edges or plumbing above.
  5. Repair the cause and re-test.

Testing from the bottom up is important. If the whole window is soaked at once, it is impossible to tell where water entered.

Repair options

  • Re-sealing the frame perimeter with a suitable weather sealant
  • Clearing and improving drainage paths
  • Replacing gaskets, brush seals and weather strips
  • Sealing frame corners and joints
  • Adjusting sashes, rollers and locks so panels close tightly
  • Replacing damaged sills or flashings
  • Replacing the window where the frame itself has failed

Our team carries out window leakage repair for homes and buildings in Dubai, including leak testing at height. For wider facade joints, see our facade sealant services.

Questions people ask about leaking windows

Why is my window leaking only when it rains hard?

Strong wind pushes rain into weak joints and overwhelms drainage that copes with light rain. These leaks need a targeted water test.

Can I just put silicone around the window?

Sometimes it helps, but sealing the wrong place can trap water inside the frame or block drainage holes, making things worse. Find the entry point first.

Is a leaking window the landlord’s responsibility?

In most rentals, window and facade repairs are the landlord’s or building’s responsibility. Report it in writing with photos.

Why does water come in when the building is being cleaned?

Cleaning water reaches joints that rain rarely hits, especially on high floors. Tell building management so the facade team can check those joints.

Can a window leak cause mould?

Yes. Repeated wetting behind skirting, under flooring or inside walls can lead to mould. Fix the leak and dry the area properly.

How long does a window leak repair take?

Simple drainage or sealant repairs can be done in a few hours. Leaks at height may need rope access planning first.

FREE SITE INSPECTION

Window leaking?

We find the real source of window leaks and fix them properly across Dubai. Send a photo or video on WhatsApp to get started.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *